EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
製品詳細
起源の場所: 中国
ブランド名: Anjeka
証明: ISO9001-2015
モデル番号: アンジェカ6111
支払いと送料の条件
最小注文数量: 25kg/ドラム
パッケージの詳細: 25kg/ドラム180kg/ドラム
受渡し時間: 3～5日
支払条件: L/C、T/T、ウェスタンユニオン
供給の能力: 100トン/月
外観: |
淡い黄色から色のない液体 |
応用: |
塗装産業 |
密度 g/cm3 (23℃): |
1.00～1.30 |
酸値 (mg KOH/g): |
150-250 |
粘度cps(25℃): |
100-800 |
有効成分(%): |
100 |
保管時間: |
12ヶ月 |
化学組成:: |
酸性基を有する共重合溶液 |
製品名: |
湿潤分散剤 |
外観: |
淡い黄色から色のない液体 |
応用: |
塗装産業 |
密度 g/cm3 (23℃): |
1.00～1.30 |
酸値 (mg KOH/g): |
150-250 |
粘度cps(25℃): |
100-800 |
有効成分(%): |
100 |
保管時間: |
12ヶ月 |
化学組成:: |
酸性基を有する共重合溶液 |
製品名: |
湿潤分散剤 |
Anjeka-6111 is a wetting and dispersing additive for solvent-borne and solvent-free coatings that improves pigment wetting, reduces the time required for the grinding process and stabilizes pigment dispersion.
The data given on this data sheet are typical values, not product specifications.
Layering and turbidity may occur at temperatures below 10˚C. Heat to 20˚C and mix thoroughly before use.
Storage time is not recommended to exceed 12 months.
This product should be stored in airtight containers and should not be re-stored after pre-dilution.
Because of its high acid value, the additive may potentially accelerate the reaction of baking systems. Check the increase in viscosity during storage is necessary.
Coating Industry
Anjeka-6111 is mainly used in high solids and solvent-free coatings. Due to its anionic properties, it is well suited for acid-catalyzed systems (e.g. coil coatings). Anjeka-6111 stabilizes inorganic pigments, especially titanium dioxide, which increases gloss, reduces haze, and considerably reduces the viscosity of the abrasive, and it can be used in conjunction with pigment pastes stabilized with the Anjeka range of additives. It can be used with pigment pastes stabilized with Anjeka additives.
●--Special Recommendations; ○--Recommendations
The amount of additives (in purchased form) is based on the pigment:
The above data are empirical, the optimum dosage should be determined by a series of tests.
In order to obtain the best performance, the additives should be added to the abrasive before the pigments.
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Tags:
ビデオ
ビデオ
