EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
製品詳細
起源の場所: 中国
ブランド名: Anjeka
証明: ISO9001-2015
モデル番号: アンジェカ6042
支払いと送料の条件
最小注文数量: 25kg
パッケージの詳細: 25kg/ドラム
受渡し時間: 3~5日
支払条件: L/C、D/P、T/T、ウェスタンユニオン
供給の能力: 100トン/月
外観: |
薄黄色液体を茶色にするため |
酸価: |
(mg KOH/g) 5-40 |
仕組み: |
(mg KOH/g) 5-40 |
密度: |
0.80~1.00g/cm3 |
粘着性のCP: |
(25℃) 50~500 |
有効成分: |
100% |
製品名: |
ポリマー分散剤 |
アプリケーション分野: |
溶剤ベースの低極性コーティングおよび印刷インキ |
外観: |
薄黄色液体を茶色にするため |
酸価: |
(mg KOH/g) 5-40 |
仕組み: |
(mg KOH/g) 5-40 |
密度: |
0.80~1.00g/cm3 |
粘着性のCP: |
(25℃) 50~500 |
有効成分: |
100% |
製品名: |
ポリマー分散剤 |
アプリケーション分野: |
溶剤ベースの低極性コーティングおよび印刷インキ |
Polymer dispersant suitable for dispersing pigments in low polarity coatings.
| Chemical composition | highly branched polymer solution |
| Appearance | Light yellow to brown liquid |
| Acid value (mg KOH/g) | 5-40 |
| Amine value (mg KOH/g) | 5-40 |
| Density g/cm³ (23℃) | 0.80-1.00 |
| Viscosity cps (25℃) | 50-500 |
| Active ingredient (%) | 100 |
The data presented on this data sheet are typical values only and do not constitute technical specifications for the product.
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
Ceramic Ink Features and Benefits
Anjeka-6402A can be used in low polarity ceramic inkjet inks with hydrocarbon and fatty acid esters, either as a dispersant alone or in combination with other products. This product also helps to shorten the grinding time and filtration time of ceramic colorant slurry, improve productivity, and prepare ceramic inks with Newtonian fluid properties. It helps to improve the storage stability of the colorants in ceramic inks, reduce sedimentation, and improve the vivid color.
This additive is recommended for dispersing colorants in ceramic inks.
Dosage of additives (in purchased form) based on the pigment: 10%-50%.
The optimum dosage should be determined through a series of tests.
For best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.