EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
製品詳細
起源の場所: 中国
ブランド名: Anjeka
証明: ISO9001-2015
モデル番号: アンジェカ6272
支払いと送料の条件
最小注文数量: 25KG
パッケージの詳細: 25kg/ドラム
受渡し時間: 3～5日
支払条件: L/C、T/T、ウェスタンユニオン
供給の能力: 100トン/月
外観：: |
淡黄色の液体 |
酸値 (mg KOH/g): |
1-15 |
アミンの値 (mg KOH/g): |
1-15 |
密度 g/cm3 (23℃): |
1.00 - 120 |
粘度cps(25℃): |
300-3000 |
有効成分(%): |
80 |
溶媒: |
水 |
製品名: |
ノニオン性ブロック共重合体分散剤 |
保管時間: |
12ヶ月。 |
応募ガイドライン: |
水性インク、塗料、水性汎用カラーペースト。 |
外観：: |
淡黄色の液体 |
酸値 (mg KOH/g): |
1-15 |
アミンの値 (mg KOH/g): |
1-15 |
密度 g/cm3 (23℃): |
1.00 - 120 |
粘度cps(25℃): |
300-3000 |
有効成分(%): |
80 |
溶媒: |
水 |
製品名: |
ノニオン性ブロック共重合体分散剤 |
保管時間: |
12ヶ月。 |
応募ガイドライン: |
水性インク、塗料、水性汎用カラーペースト。 |
Anjeka-6272 is a polymer dispersant for aqueous coating systems, printing inks and adhesives. It is a standard additive for resin-free pigment concentrates. It is mainly used for organic pigments and carbon blacks, and has good viscosity reduction and color spreading properties.
Chemical composition: nonionic block copolymer
Typical Physical Chemistry Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
When stored or transported at temperatures below 15°C, delamination or turbidity may occur. Heat to 40°C and stir before use.
Storage time is not recommended to exceed 12 months.
Water-based inks, coatings, water-based general-purpose color pastes.
Properties and advantages.
This additive causes pigment deflocculation through spatial stabilization. Due to the small particle size of the deflocculated pigment, it is possible to obtain a high gloss, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved. Due to the reduced viscosity, the flow properties are improved and the pigment content can be increased.
This additive is particularly suitable for the production of stable, resin-free pigment concentrates with pigment contents of 30-70%. These pigment concentrates can be used for paint mixing with standard aqueous bases.
●--Special recommendation; ○--Recommendation
This additive is also recommended for the production of stabilized resin-free pigment concentrates for the preparation of waterborne coatings with no floating/blooming colors.
Additive dosage (in purchased form) is based on pigment:
The above data are empirical and the optimum dosage should be determined through a series of tests.
It can be added before grinding, and has good general effect in water-soluble, aqueous dispersion and emulsion system.
Tags:
ビデオ
ビデオ
