EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
製品詳細
起源の場所: 中国
ブランド名: Anjeka
証明: ISO9001-2015
モデル番号: アンジェカ6402
支払いと送料の条件
最小注文数量: 25KG
パッケージの詳細: 25kg/ドラム
受渡し時間: 3～5日
支払条件: L/C、D/P、T/T、ウェスタンユニオン
供給の能力: 100トン/月
外観: |
薄黄色液体を茶色にするため |
酸価: |
(mg KOH/g) 2-40 |
仕組み: |
(mg KOH/g) 2-40 |
密度: |
0.80~1.00g/cm3 |
粘着性のCP: |
(25℃)100～1000 |
有効成分: |
50% |
溶媒: |
ホワイトミネラルオイル |
に適しています: |
無溶剤 溶剤系エポキシ系 |
外観: |
薄黄色液体を茶色にするため |
酸価: |
(mg KOH/g) 2-40 |
仕組み: |
(mg KOH/g) 2-40 |
密度: |
0.80~1.00g/cm3 |
粘着性のCP: |
(25℃)100～1000 |
有効成分: |
50% |
溶媒: |
ホワイトミネラルオイル |
に適しています: |
無溶剤 溶剤系エポキシ系 |
ANJEKA-6402 is a modified polyurethane copolymer solution with acidic groups, which is a dispersant for solvent-borne medium/low polarity resin system coatings and ink systems, and is used for the dispersion of inorganic and organic pigments.
| Appearance | Pale yellow to brownish yellow liquid |
|---|---|
| Acid value(mg KOH/g) | 20 - 70 |
| Amine value(mg KOH/g) | 0 - 15 |
| Density g/cm³(23℃) | 1.00 - 1.20 |
| Viscosity cps(25℃) | 5 - 250 |
| Active ingredient(%) | 50 |
| Solvent | Ethylene Glycol Diacetate (EGDA) |
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, heat to 30℃-40℃ and stir well.
Storage time is not recommended to exceed 12 months.
The product has a certain acid value, which may catalyze the cross-linking of the baking paint system. The adaptability of the paint system during storage should be checked.
Coating industry and printing inks
Properties and Advantages.
The additive unflocates and stabilizes the pigments by means of spatial resistance. Due to the small size of the deflocculated pigment particles, multicolor systems are free of color float and bloom. This increases the gloss, color strength, transparency and hiding power of the coating. The additive reduces viscosity, thus improving flow and increasing the amount of pigment added. When used for electrostatic high-speed spin-cup application of inorganic pigments, it significantly reduces haze.
This additive is recommended for stabilizing inorganic pigments, especially titanium dioxide, in solvent-borne and solvent-free coatings as well as in printing inks. Due to its anionic character it is ideal for acid-catalyzed systems (e.g. coil coatings).
The amount of additive (in purchased form) is based on the pigment:
The above data are empirical and the optimum amount should be determined through a series of tests.
For optimum performance, add the additives to the abrasive before adding the pigments.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
