Anjeka7423 wetting additive for water-based substrate good wettability for white carbon black

Anjeka7423 highly effective polyether-modified silicone surfactant for aqueous coatings

GENERAL DESCRIPTION

Anjeka-7423 is a highly effective polyether-modified silicone surfactant for aqueous coatings, printing inks, and overprint varnishes (OPV). It provides a powerful reduction in surface tension, dramatically improving substrate wetting. Compared to Anjeka-7422, Anjeka-7423 offers significantly enhanced stability across a broader pH range of 3 to 12.

PRODUCT DATA

Chemical Composition: Polyether-modified polysiloxane.

Typical Physical & Chemical Data: (Values are typical and not binding specifications.)

Appearance: Colorless, transparent liquid.

Active Ingredient: 100%.

Density (23°C): 0.98 – 1.04 g/cm³.

STORAGE & HANDLING

Low-Temperature Note: Separation or turbidity may occur below 5°C. Warm to 20°C and mix thoroughly before use.

Shelf Life: 12 months (recommended maximum).

SPECIAL NOTES

pH Stability: Demonstrates long-term stability in systems with a pH of 4–10.

Formulation Guidance: To prevent haze, formulations containing Anjeka-7423 should include a small amount of co-solvent (approximately 5% of total solvent).

Performance Note & Alternative: In systems with very high co-solvent content, its effectiveness may decrease. For such formulations, Anjeka-7333 is the recommended alternative.

APPLICATION GUIDELINES

Industrial Coatings
Features and Benefits:
Anjeka-7423 is a high-performance wetting and leveling agent that delivers the following key advantages:

Superior Wetting & Leveling: Significantly lowers surface tension to enhance substrate wetting and film leveling.

Foam Neutral: Has minimal to no foam-stabilizing effect.

Recoatability: Does not negatively impact intercoat adhesion.

Specialty Filler Wetting: Exhibits excellent wetting performance on fumed silica.

Surface Feel: Does not increase surface slip. *(For applications requiring higher slip, adding Anjeka-7333 is recommended.)*

Recommended Application Sectors
All aqueous coatings, printing inks, and overprint varnishes, provided a minor amount of co-solvent (approx. 5%) is included in the formulation.

Recommended Dosage

0.05% – 0.5% on total formulation weight (as supplied).

Note: This is a typical starting range. Optimal dosage should be determined through application-specific testing.

Incorporation & Processing
While it can be added at any production stage, adding it during the final phase of coating manufacture is recommended for optimal results.

PACKAGING

25 kg in lined iron drums.

180 kg in tight-head plastic drums.

Our service:

1. Respond to inquiries within 24 hours.

2. Superior quality products at competitive prices.

3. Strong R&D and technical support.

4. Dedicated professional team service.

5. Flexible customized production for various packaging options.

6. On-time delivery with no delays.

Our team:

Our company:

We are building a new large-scale production base

strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.

Benefits to our customers and collaboration partners:

• stable large-scale production, better quality control

• lower production unit cost

Collaboration Opportunities:

• contract manufacturing and OEM/ODM collaboration opportunities

Our Certifcate&Patents